High Altitude Conversion Packages for Improved Ignition Timing
FIGURE 2
3.
Replace carburetor main (primary) air jet with jet supplied in the respective kit (Figure 1). Be sure to use the proper screwdriver (Figure 2).
4.
Reinstall air cleaner cover.
FIGURE 1
FIGURE 6
5.
Install emission control information update label supplied in kit (Figure 1) to properly cleaned location on the hood as indicated in Figure 6.
High Altitude to Low Altitude
Performance Adjustments
The following procedure applies to vehicles returned to service at low altitude (below 4,000 feet above sea level) which previously had the high altitude
kit installed. This procedure does not remove any components installed in high altitude kit.
1.
Remove complete air cleaner assembly from engine (cover and filter housing).
