D50/Power Ram 50 L4-2350cc 2.4L SOHC (1992)
Hood: Adjustments
1. Adjust the fit of hood with the hood adjusting bolts, hood latch adjusting bolts and hood bumper while they are installed. Loosen the hood
adjusting bolts and adjust the hood laterally with reference to the hood latch.
2. After lateral adjustment of hood, adjust the hood vertically with the hood adjusting bolts and hood latch adjusting bolts. Make sure that the hood
hook is properly engaged with the hood latch.
NOTE: Apply chassis grease to the sliding portion, the rotating portion and the spring of the hood latch.
3. Turn the hood bumper and adjust the vertical position of the hood by adjusting the hood bumper either up or down.