D50/Power Ram 50 L4-2350cc 2.4L SOHC (1992)
Idle Speed/Throttle Actuator - Electronic: Description and Operation
Idle Speed Control (ISC) Servo Circuit
LOCATION
The IAC is located on the throttle chamber.
PURPOSE
The Idle Air Control (IAC) servo regulates and controls the idle for the loads placed on the engine.
OPERATION
The IAC servo is a DC motor that regulates the amount of air taken in through the bypass circuit of the intake manifold by opening and closing the
servo valve located in the air passage. The ECU supplies voltage in one polarity direction, which turns the motor in a particular rotation. The
motor shaft is connected to a screw that when turned, opens the passage by moving the pintle. When the ECU reverses polarity, the passage is
closed in the same manner.
The ECU uses several sensor inputs to determine the operating condition of the engine and the loads being placed on it. The ECU adjusts the idle
for air conditioning and automatic transmission loads and controls fast idle for cold start. The ECU uses the idle air control (IAC) servo to make
all of the adjustments to the idle.
