D50/Power Ram 50 L4-2350cc 2.4L SOHC (1992)
EGR Temperature Sensor: Testing and Inspection
To test the EGR Temperature Sensor, located on the EGR valve, proceed as follows.
EGR Temperature Sensor Test
1. Place the EGR temperature Sensor in water and heat to 122°F (50°C).
2. Read the resistance value between terminals 1 and 2, resistance should be between 60k - 83k ohm.
3. Heat the water to boiling, 212°F (100°C).
4. Read the resistance value between terminals 1 and 2, resistance should be between 11k - 14k ohm.
If the EGR Temperature Sensor measures out of the specification range, replace the sensor.