D50/Power Ram 50 L4-2350cc 2.4L SOHC (1992)
Fig. 13 Measuring spring free length. Automatic locking hub
a. Measure free length of spring as shown.
b. Minimum return spring free length is 1.38 inches.
c. Minimum shift spring free length is 1.18 inches.
8. Replace any components that are damaged, excessively worn, or that are not within specifications.
ASSEMBLY
Apply Mopar grease 2525035 or equivalent to mounting surfaces of all components and reverse disassembly procedure, noting the following:
1. Pack grooves of retainer B with specified grease.
2. Install return spring with smaller diameter coil toward cam.
3. Pack grooves of brake B with specified grease.
Installation
1. Drive outer races into front hub using a suitable drift, then evenly coat inner wall of front hub with grease.
2. Pack inner and outer bearings with suitable grease. Apply grease to oil seal lip.
3. Position inner bearing and oil seal on hub, then install oil seal using tool No. MB990985.
