D50/Power Ram 50 L4-2350cc 2.4L SOHC (1992)
Clutch Pedal Assembly: Adjustments
Fig. 1 Clutch Pedal Adjustment Specifications
Fig. 2 Clutch Pedal Height & Freeplay Measurement
Fig. 3 Clutch Cable Adjustment
Fig. 4 Clutch Release Point Measurement
MODELS W/CABLE RELEASE SYSTEM
1. Measure clutch pedal height (A) If height is not within specifications, adjust with pedal stopper bolt. If pedal height is not within specifications on
models without stopper bolt, check pedal stop and pedal support for damage and wear and repair as needed.
2. Measure clutch pedal freeplay (B) If freeplay is not within specifications, adjust as follows:
a.
Pull outer cable away from cable retainer at toe board and turn adjusting wheel until clearance (C), is 0.12-0.16 inch.
