D50/Power Ram 50 L4-2555cc 2.6L SOHC (1987)
Stabilizer Bar: Service and Repair
Rear
1. Remove stabilizer bar from stabilizer link assembly and lower arm.
2. Reverse procedure to install, noting the following:
a. On 1985-88 models tighten stabilizer link to No. 1 crossmember until protrusion of stud above top of nut is 0.24-0.31 inch.
b. On 1985-88 models, tighten stabilizer bar to lower arm nut until protrusion of stud above top of nut is 0.24-0.31 inch.