D50/Power Ram 50 V6-181 3.0L SOHC (1991)
9. Air selection control wire disconnection
10. Mode selection control wire disconnection
11. Temperature control wire disconnection
12. Speaker garnish
13. Parcel box or clock
14. Hole cover(for instrument panel attaching nut)
15. Center cover
16. Shift knob
17. Floor console assembly
18. Instrument panel
NOTE: Reverse the removal procedures to reinstall.
SERVICE POINTS OF REMOVAL
1. Removal Of Hazard Warning Flasher Switch
Insert the trim stick into the switch or hole cover and then pry the switch or hole cover to remove it from the meter hood.
3. Removal Of Meter Hood
a. Operate the tilt lever to bring the steering down.
b. Remove meter hood attaching screws.
4. Removal Of Meter
a. Remove meter attaching screws.
b. Pull out meter. Disconnect the speedometer cable from the meter case by pushing the stopper of the plug on the speedometer cable side of the
connection.
c. Disconnect the connectors of the meter harness.
