D50/Power Ram 50 V6-181 3.0L SOHC (1991)
Inhibitor Switch: Testing and Inspection
Inhibitor Switch Test
Inhibitor Switch Location
Models w/Automatic Transaxle
1.
Disconnect inhibitor switch connector.
2.
Operate selector lever and check continuity between terminals 1 and 2 of inhibitor switch side connector.
3.
Continuity should exist with selector lever in P and N position, but should not exist with selector lever in R, D, 2 or L position.
4.
If test results are not as specified, adjust or replace inhibitor switch.
