D50/Power Ram 50 V6-2972cc 3.0L SOHC (1990)
Intake Manifold: Service and Repair
Intake Plenum Replacement
Intake Plenum
REMOVE
1. Air intake hose connection
2. Accelerator cable adjusting bolt
3. Throttle control cable connection
4. Accelerator cable connection
5. Vacuum hose connection
6. Brake booster vacuum hose connection
7. EGR temperature sensor connector
8. Vacuum hose connection
9. EGR pipe attaching bolt
10. Gasket (non-reusable)
11. High tension cable connection
12. Ignition coil
13. Engine oil filler neck bracket
14. PCV hose connection
15. Throttle body assembly, Take out the throttle body installation bolts, taking care not to disturb the throttle body during the operation.
NOTE: Leave the water hoses attached to the throttle body assembly.
16. Throttle body gasket (non-reusable)
17. Bolt
18. Bolt and nut
19. Air intake plenum
20. Air intake plenum gasket (non-reusable)
21. EGR valve
22. EGR gasket (non-reusable)
23. Air intake plenum front stay
24. Air intake plenum rear stay
INSTALL