D50/Power Ram 50 V6-2972cc 3.0L SOHC (1990)
Throttle Body: Service and Repair
Throttle Body Replacement
Throttle Body Removal
REMOVAL
1.
Remove the air intake hose.
2.
Remove the accelerator cable.
3.
Remove the cruise control cable if equipped.
4.
Remove the four bolts securing the throttle body to the intake air plenum and remove the throttle body.
INSTALLATION
1.
Install a new gasket.
2.
Install the throttle body and torque the bolts, in a cross-pattern, to 7-9 lb-ft (10-13 Nm).
3.
Connect the throttle cable (and cruise control cable, if equipped).
4.
Connect the intake air duct.
