D50/Power Ram 50 V6-2972cc 3.0L SOHC (1990)
Band: Adjustments
Rear Band Adjustment
Fig. 6 Low-reverse band adjustment
1.
Raise and support vehicle.
2.
Loosen transmission oil pan bolts, drain fluid and remove oil pan.
3.
Using adjustment wrench tool No. C-3380-A or equivalent, torque band adjusting screw to 30 inch lbs, Fig. 6.
4.
Back off adjusting screw six turns. Hold adjusting screw in this position and torque lock nut to 25 ft-lbs.
5.
Install oil pan using a new gasket. Torque oil pan bolts to 150 inch lbs.
6.
Fill transmission with specified ATF.