D50/Power Ram 50 V6-2972cc 3.0L SOHC (1990)
Figure 5
5.
Install the OD piston retainer. Install the six long bolts in the location shown in Figure 5. Tighten the bolts to 100 inch pound (11N-m) torque.
6.
Install the roller/spring assembly in the cam.
7.
Install the low/reverse drum (the overrunning clutch cam is pressed onto the drum).
Figure 6
8.
Rotate the low/reverse drum. Viewed from the front of the transmission the drum rotate freely when turner clockwise and lock when turned
counterclockwise. Figure 6.
POLICY:
Information only.