D50/Ram 50 L4-1997cc 2.0L SOHC (1984)
Fig. 21 Rocker arms, rocker shafts & camshaft exploded view. 2000cc engines
7. Disassemble components in numerical order, Fig. 21, noting position for installation.
INSTALLATION
1. Coat camshaft with suitable assembly lubricant and position cam in head, with camshaft aligned so that valves for No. 1 cylinder are closed (TDC
on compression stroke).
Fig. 17 Rocker arm shaft installation, 1600cc, 2000cc engines
2. Insert rocker shafts into front bearing cap, installing shaft with oil hole side down and noting that front end of shaft has a cut .16 inch wide, Fig.
17.
Fig. 22 Assembling rocker arms & rocker arm shafts. 2000cc engine
3. Apply engine oil to I.D. of rocker arms prior to assembly. Assemble rocker arms, springs and remaining bearing caps on rocker shafts, Fig. 22, in
positions noted during disassembly.
Fig. 23 Hydraulic lash adjuster & retaining clip installation. 1985-88 2000cc & 2600cc engines
4. On models with hydraulic lash adjusters, insert each adjuster into rocker arm taking care not to spill fluid from adjuster. Retain adjusters using
suitable clips, Fig. 23, to prevent them from falling out during installation.
5. On all models, install assembly onto cylinder head and evenly tighten bolts in crossing pattern until bearing caps are seated. When caps are seated,
