D50/Ram 50 L4-1997cc 2.0L SOHC (1984)
Steering Gear: Service and Repair
Power Steering Gear Service
Fig. 4 Power steering gear exploded view
Disassembly
1. Remove adjusting locknut, then side cover bolts and turn in adjusting bolt 2 or 3 turns.
2. With gear in neutral (center) position, tap bottom of cross shaft with plastic hammer to remove shaft.
3. Remove valve housing nut using tool No. MB990667 for large gear and No. MB990852 for small gear, then valve housing bolts. While holding
rack piston to avoid rotation, remove valve housing and rack piston.
