D50/Ram 50 L4-1997cc 2.0L SOHC (1984)
Stabilizer Bar: Service and Repair
Rear
1. Remove stabilizer bar from stabilizer link assembly and lower arm.
2. Reverse procedure to install, noting the following:
a. On 1984 models tighten stabilizer link to No. 1 crossmember until protrusion of stud above bottom of nut is 0.63-0.71 inch.
b. On 1984 models, tighten stabilizer bar to lower arm nut until protrusion of stud above bottom of nut is 0.63-0.71 inch.
