D50/Ram 50 L4-2350cc 2.4L SOHC (1992)
Brake Caliper: Testing and Inspection
Brake Lines & Linings
Remove one of the front wheels and inspect the brake disc, caliper and linings. The wheel bearings should be inspected at this time and repacked if
necessary.
Do not get any oil or grease on the linings. It is recommended that both front wheel sets be replaced whenever a respective pad is worn or damaged.
Inspect and, if necessary, replace rear brake linings also.
If the caliper is cracked or fluid leakage through the casting is evident, it must be replaced as a unit.
