D50/Ram 50 L4-2350cc 2.4L SOHC (1992)
Coolant Temperature Sensor/Switch (For Computer): Service and Repair
Coolant Temperature Switch Removal and Installation
Coolant Temperature Switch Location
REMOVAL
1. Drain approximately 2 quarts of coolant from the radiator drain plug.
2. Disconnect the electrical connector.
3. Remove the sensor with a suitable socket.
INSTALLATION
1. Apply sealant to the threaded portion of the sensor.
Specified Sealant:
3M Nut Locking P/N 4171 or equivalent.
2. Install the sensor and tighten to the specified torque.
Specified Torque:
9 - 13 ft.lbs. (12 - 18 Nm)
3. Reconnect the electrical connector.
4. Refill the radiator and check for leaks.