D50/Ram 50 L4-2350cc 2.4L SOHC (1992)
Wheel Bearing: Adjustments
2WD
1. Install hub bearings on spindle.
2. Install hub nut and torque to 22 ft. lbs to seat bearings.
3. Loosen hub nut, then torque nut to 6 ft-lbs.
4. Install nut retainer cap and cotter pin. If cotter pin holes are not aligned, loosen nut to align holes. The nut may be loosened to a maximum of 30°
to align cotter pin holes.
5. Check to ensure hub assembly rotates freely without play.
