D50 2WD L4-156 2556cc 2.6L VIN 7 2-bbl (1982)
Carburetor: Adjustments
Carburetor
Invert air horn, with gasket removed, and measure distance from bottom of float to surface of air horn, using a suitable depth gauge.
-
If reading is not within limits, the shim located under needle seat must be changed.
-
Use shim kit MD606952 or equivalent, which has three shims with thicknesses of 0.012 inch, 0.016 inch and 0.020 inch.
NOTE: Adding or removing a shim will change float level by three times the thickness of the shims.