D50 4WD L4-156 2556cc 2.6L VIN 7 2-bbl (1982)
Hood Support Rod: Customer Interest
Hood Support Rod Bumper - Rattles
Models
1982 Arrow & Ram 50
Subject
Hood Rod & Bumper Modification
Index
BODY
Date
March 10, 1983
No..
23-02-83
P-709-C
SYMPTOM/CONDITION
Some early subject model vehicles built prior to August, 1982 may have an incorrect hood support rod bumper. This condition can result in a rattle.
FIGURE 1
REPAIR PROCEDURE
1.
Raise hood and check dimension of bumper, refer to Figure 1. Replace with new bumper PN MB270300 if dimension is not correct.
FIGURE 2
2.
If hood support rod does not seat properly, bend rod slightly as shown in Figure 2.
POLICY:
Reimbursable within the provisions of the warranty