D50 4WD L4-156 2556cc 2.6L VIN 7 2-bbl (1982)
Piston: Service and Repair
Fig. 50 Piston & rod assembly
This piston and rod is assembled with the indented arrow on the piston and the embossed numeral on the rod facing toward front of engine, Fig. 50.
PISTON, PINS & RINGS
Pistons and rings are available in standard size and oversizes of 0.010, 0.020, 0.030 and 0.039 inch. Oversize pins are not available.
MAIN & ROD BEARINGS
Main and rod bearings are available in undersizes of 0.010, 0.020 and 0.030 inch.
The main bearing caps are installed with arrows facing front of engine.
