D50 4WD L4-156 2556cc 2.6L VIN 7 2-bbl (1982)
Fig. 47 Counterbalance shaft drive chain & tensioner installation. 2600cc engines
5.
Install two counterbalance shaft sprockets ``B'' on chain ``B,'' aligning the mating marks. The mating marks on sprockets are punched marks on the
corresponding teeth. The mating marks on the chain are three plated links, Fig. 47.
6.
Install chain ``B'' on crankshaft sprocket, then the two counterbalance shaft sprockets ``B'' and tighten the lock bolts.
7.
Install chain guides ``A,'' ``B'' and ``C,'' Fig. 47, and loosely install mounting bolts.
8.
Tighten chain guides ``A'' and ``C'' mounting bolts.
9.
Shake right and left sprockets ``B'' to collect chain slack at point ``P,'' Fig. 47. Adjust position of chain guide ``B'' so when the chain is pulled in
direction of arrow ``Y,'' Fig. 47, the clearance between chain guide ``B'' and the links of chain ``B'' will be 0.04 - 0.14 inch. Tighten chain guide
``B'' mounting bolts.
10.
Install timing case gasket and case.
11.
Install oil screen and oil pan.
12.
Install crankshaft pulley.
