D50 4WD L4-156 2556cc 2.6L VIN 7 2-bbl (1982)
MODELS W/HYDRAULIC RELEASE SYSTEM
1. Measure clutch pedal height (A).
2. Check clutch pedal clevis pin play. It should be 0.04-0.12 inch, measured at pedal.
3. If clutch pedal height is not within specifications, turn either the clutch switch or adjusting bolt to bring height within specifications. If clevis pin
play is not within specifications, adjust clutch master cylinder pushrod as necessary to bring play within specifications. Do not press pushrod into
master cylinder when adjusting clevis pin clearance.
4. Check clutch pedal freeplay and clutch release point. If either dimension is not within specifications, hydraulic system requires bleeding or clutch
is faulty.
