D 100 Pickup V8-318 5.2L (1985)
12. Install spring retainer, spring, drive gear and drive gear snap ring.
13. Apply RTV sealant to seating edge of grease cap, then install the cap.
14. Position inboard brake shoe on adapter with shoe flanges in adapter keyways. Slowly slide caliper assembly into position in adapter and over brake
disc.
15. Install anti-rattle springs and retaining clips. Torque to 180 inch lbs.
16. Apply a 1/16 inch bead of suitable sealant along bolt circle of cover.
17. Allow sealant to cure and install on axle. Torque attaching bolts to 420 inch lbs.
18. Remove fill plug and fill axle with suitable lubricant.
19. Install tire and wheel assembly.
Removal
Fig. 19 Removing snap ring. 60 Front Axle
Fig. 20 Removing hub lock nut. 60 Front Axle
Fig. 21 Removing or replacing axle shaft. 60 Front Axle
Fig. 22 Removing or replacing upper socket pin. 60 Front Axle