D 100 Pickup V8-360 5.9L (1984)
FIGURE 1
4.
Place damper assembly with attached bracket onto outlet end of pressure regulator and line up with locating notch (Figure 1)
5.
Replace nut onto pressure regulator outlet nipple and torque to 100 inch pounds (+/-) 20 inch pounds.
6.
Attach free end of formed hose onto pressure regulator with the supplied clamp and torque to 8-13 inch pounds.
FIGURE 1
7.
Return hose, originally attached to pressure regulator, should be reassembled onto outlet nipple of damper with remaining clamp. Torque to 8-13
inch pounds (Figure 1).