D 150 Pickup V6-239 3.9L (1992)
Crankshaft Position Sensor: All Technical Service Bulletins
Transmission - Removal Precautions
NO.: 21-16-91
GROUP:
Transmission
DATE:
Dec. 20, 1991
SUBJECT:
Transmission Removal Procedure
NOTE:
THIS BULLETIN APPLIES TO AB, AD, AND AN VEHICLES EQUIPPED WITH 3.9/5.2L MULTI-POINT ENGINES.
MODELS:
1992 (AB) RAM VAN/WAGON (AD) RAM PICKUP/RAM CAB & CHASSIS/RAMCHARGER (AN) DAKOTA/DAKOTA SPORT/DAKOTA CAB
& CHASSIS
DISCUSSION:
A crank position sensor has been installed on 1992 AB, AD, and AN vehicles equipped with 3.9/5.2L engines. The crank position sensor is bolted to the
cylinder block near the rear of the right cylinder head. The crank position sensor could be damaged when removing or installing the transmission for
repair. Prior to removing the transmission, the crank position sensor must be removed, and should not be installed until after the transmission has been
installed back into the vehicle, to prevent any damage to the crank position sensor.
POLICY:
Information only