D 150 Ramcharger V8-360 5.9L (1989)
Engine Mount: Service and Repair
Front Mount
1. Raise hood, then position fan and related components to ensure necessary clearance.
2. Raise and support vehicle, then attach a suitable lifting device to engine.
3. Remove engine mount to frame attaching nuts.
4. Raise engine slightly, then remove mounts. Some models incorporate a insulator between the engine mount and engine mount attaching
bracket.
5. Reverse procedure to install, noting the following:
a.
Torque attaching nuts to 75 ft. lbs.
b.
On models except Ramcharger and Conventional Cab models with 3.9L, torque attaching bolts to 65 ft. lbs.
c.
On Ramcharger and Conventional Cab models with 3.9L, torque attaching bolts to 30 ft. lbs.
