dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

All Technical Service Bulletins for Steering Gear Bracket: > < Steering Wheel - Off Center
Page 2
background image

4.

Install the serrated shoulder bolt.

5.

Hold the head of the bolt using a wrench and pull the bolt through the bracket and frame by tightening the nut to 230 N-m (170 ft.lbs.).

6.

Turn steering wheel lock-to-lock. Verify that steering gear bracket does not move.

7.

Install left front wheel.

8.

Check the position of the steering wheel while driving the vehicle in a straight line. If necessary, remove the steering wheel and reposition on
center.

Refer to the appropriate service manual for repositioning steering wheel instructions.

NOTE: ON 1991 VEHICLES, CAUTION SHOUID BE TAKEN TO PREVENT DAMAGE TO THE CLOCKSPRING IF THE STEERING WHEEL

IS REMOVED.

POLICY:  Reimbursable within the provisions of the warranty.

TIME ALLOWANCE:
Labor Operation No. 19-00-01-97  . . . . . . . . . . . . . . .  0.6 Hrs.

FAILURE CODE: 50 - Improper Adjustment

All Technical Service Bulletins for Steering Gear Bracket: > < Steering Wheel - Off Center