D 150 Ramcharger V8-360 5.9L (1989)
rod so that return spring action is not restricted. If necessary, disassemble and clean or repair parts to assure free action.
3.
Hold transmission throttle lever firmly forward against its internal stop and torque swivel lock screw to specifications.
4.
Lower vehicle and test linkage operation by moving throttle rod rearward and slowly releasing it making certain that it returns fully.
5.
On 1990-92 models, reconnect ISC actuator, then reposition for normal operation as follows:
a.
Turn ignition to On position for minimum 5 seconds, do not start engine.
b.
Turn ignition switch to Off position. Actuator is now positioned for normal operation.
