D 250 Pickup L6-359 5.9L DSL (1992)
Lubricate the camshaft lobes, journals and thrust washer with Lubriplate 105.
CAUTION: When installing the camshaft, do not push it in farther than it will go with the thrust washer in place. Pushing it too far can dislodge
the plug in the rear of the cam bore and cause an oil leak.
Install the camshaft/thrust washer. Align the timing marks as illustrated.
Install the thrust washer capscrews and tighten to 24 N-m [18 ft-lbs].
Verify the camshaft has the correct amount of back lash and end clearance.
