D 250 Pickup V8-360 5.9L VIN W (1987)
FIGURE 3-B - BODY WIRING HARNESS
D.
Body Wiring Harness PN 4362286
1.
Route the single wire with eyelet terminal of body wiring harness, PN 4362286, to the rear of the vehicle through the existing hole in the rail
(Figures 3-A and 3-B). Clip the wiring into the existing ring clips. Remove the ground screw and install both eyelet (ground) terminals into
the screw and torque to 95 inch pounds. Take up excess ground wire and tie wrap as shown in Figure 3-A.
