D 250 Pickup V8-5.9L VIN Z (1992)
Thermostatic Air Cleaner Vacuum Switch: Service and Repair
REMOVAL
1.
Remove air cleaner from throttle body.
Removing Heated Air Temperature Switch
2.
Remove and discard retainer clip. A new clip is supplied with new original equipment sensors.
3.
Remove and discard the sensor and gasket.
INSTALLATION
1.
Position gasket onto sensor. Install sensor into position in air cleaner.
2.
Support sensor outer edges and securely install retainer clip to be sure gasket forms a tight air seal. Do not attempt to adjust sensor.
3.
Connect vacuum hoses to sensor.
4.
Install air cleaner to throttle body.
