D 250 Pickup V8-5.9L VIN Z (1992)
Servicing The Fuel Injector
7.
Make sure the injector lower O-ring has been removed from the pod.
INSTALLATION
1.
Install lower O-ring on injector. O-ring should butt against plastic filter assembly. Inspect both O-rings for cuts or tears and replace if necessary.
Fuel Injector And Injector Cap
2.
Align the injector terminal housing with the locating socket in the injector cap.
Installing Fuel Injector
3.
Press injector into cap so that upper O-ring flange is flush with lower surface of cap.
4.
Spray inner surfaces of both injector pods with Mopar Brake and Carburetor Parts Cleaner to remove residual gasoline.
5.
Lightly lubricate the upper and lower O-rings with petroleum jelly.
6.
Place injector and cap in injector pod and align cap locating pin with locating hole in the casting.
