D 250 Pickup V8-5.9L VIN Z (1992)
Clockspring Assembly / Spiral Cable: Service and Repair
Installation
INSTALLATION
1. Snap clockspring on steering column. If clockspring is not properly positioned refer Centering procedure.
See: Centering
2. Connect clockspring to instrument panel electrical connector, ensuring locator clips and lock tabs are properly positioned.
3. Install steering column shrouds. Ensure air bag wire is inside shrouds.
4. Ensure front wheels are in straight ahead position, then install steering wheel, ensuring hub flats align with clockspring.
5. Pull horn lead through small upper hole, then pull air bag and speed control leads through larger hole. Ensure leads are not pinched under steering
wheel.
6. Connect horn and air bag electrical connectors at air bag module.
7. Install air bag module as outlined under Driver Air Bag Module, Replace.
See: Air Bag/Service and Repair/Driver Side Airbag Module Replacement
8. Install speed control switch and electrical connector or uncover.