D 350 Pickup L6-359 5.9L DSL (1989)
pipe with 2 3/8 Inch O.D. will work well. Make sure the ends of the pipe section are exactly perpendicular to the length.
FAN HUB - ASSEMBLY
Clean all parts thoroughly in solvent and dry with compressed air.
Support housing in press. Press a new bearing in from the front side with a flat plate over the bearing.
Push it flush with the front of the housing.
Support the inner race of the bearing from the bottom and press the fan mounting hub into the bearing from the front side. Press the hub until the hub
shoulder contacts the inner race (1).
