D 350 Pickup L6-359 5.9L DSL (1989)
CAUTION: Be sure the "Front" marking on the piston and the numbers on the rod and cap are oriented as illustrated.
CAUTION: Use care when you install the piston and connecting rod so the cylinder bore is not damaged.
Position the piston and rod assembly into the cylinder bore with the word "Front" on the piston towards the front of the cylinder block.
Push the piston into the bore until the top of the piston is approximately 50mm [2 inch] below the top of the block. Carefully pull the connecting rod onto
the crankshaft journal.
NOTE: The following series of illustrations show the engine in a vertical position. This is for clarity of illustration only.
