D 350 Pickup L6-359 5.9L DSL (1989)
Oil Pick Up/Strainer: Service and Repair
OIL PAN, SUCTION TUBE AND/OR GASKETS - REPLACEMENT
NOTE: This operation will require engine removal.
Drain the oil and remove the pan and gasket.
If required, remove the suction tube and gasket.
Clean the sealing surfaces.
Install the suction tube and gasket.
CAUTION: Be sure to connect the support bracket.
Torque Value: 24 N-m [18 ft-lbs]
CAUTION: Be sure to fill the joints between the pan rail, gear housing and rear cover. Use Three Bond 1207-C.
Sealing surfaces
^
A - Pan rail to gear housing
^
B - Pan rail to rear cover