D 350 Pickup L6-359 5.9L DSL (1989)
Remove the timing pin assembly and gasket.
Install a new gasket and, if required, a new timing pin assembly.
Apply a coat of Loctite 59241 liquid Teflon to the threads of the Torx head screws.
Hold the pin (A) in the hole (B) in the camshaft gear to align the housing.
Torque Value: 5 N-m [44 in-lbs]
TIMING PIN HOUSING ASSEMBLY - INSTALLATION (WITH HEAD ON)
The location of the timing pin assembly on the gear housing is critical for correct engine adjustments. Follow this procedure to install the assembly
so that it corresponds to Top Dead Center (TDC) for Cylinder Number 1.
