D 350 Pickup L6-359 5.9L DSL (1989)
Installing New Bearing On Eccentric
1. Bearing can be removed from eccentric with a standard bearing splitter tool and press.
2. Install new bearing with a press and suitable size socket as a press tool. To avoid damaging the bearing, make sure the socket bears only against
the bearing inner race.
Assembly
Installing Shaft Bore O-Ring
1. Lube new adapter O-ring with engine oil and install in adapter.
2. If pump adapter was removed from housing, reinstall and tighten attaching bolts/nuts to 124 in lb (12 - 14 Nm).
3. Lube new shaft bore O-ring with engine oil and install in housing bore.
4. Lube vacuum pump housing bushings with oil.
Housing Mounting Spacers
5. Install mounting spacers on power steering pump.
