D 350 Pickup L6-359 5.9L DSL (1989)
CAUTION: Some of the capscrew holes are drilled through and must be sealed. Apply liquid teflon sealant to the capscrews.
Install the capscrews.
Torque Value: 24 N-m [18 ft-lbs]
Assemble the intake piping and intake manifold heater.
Connect the fuel heater ground wiring.
Torque Value:
^
Intake crossover tube capscrews - 24 N-m [18 ft-lbs]
^
Fuel heater ground capscrew - 12 N-m [110 in-lbs]
^
Hose clamps - 5 N-m [44 in-lbs]
Install and bleed the high pressure fuel lines.
Torque Value: 24 N-m [18 ft-lbs]
