dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Starter Testing|Page 2974 > < Starter Testing
Page 2
background image

^

12 volts at the solenoid battery post - check the voltage at the S (switch) terminal on the solenoid. The ignition switch must be in the start
position.

The solenoid is at fault if the check indicates 12 volts at the S terminal.

If no voltage is indicated at the S terminal, check:
^

Check the fuses.

^

Check the voltage at the ignition switch.

^

Check the clutch switch or the neutral safety switch.

^

Check starter relay switch.

If the solenoid does make an audible sound, turn the switch off and attempt to bar the engine In both directions.

Starter Testing|Page 2974 > < Starter Testing