Dakota 2WD L4-153 2.5L SOHC (1990)
4. Disconnect intermediate cable from connectors and right side cable guide.
5. Remove the cable.
INSTALLATION
1. Locate cable guides in frame rail slots as follows:
a. Locate correct slots in frame rails for cable guides. There are several frame slots in this area so be sure to measure correctly.
b. On 2-wheel drive models, locate guides in slots that are 34.54 cm (13.6 in) rearward of weld seam in frame rail.
c. On 4-wheel drive models, locate guides in slots that are 47.5 cm (18.7 in) rearward of weld seam in frame rail.
2. Guide both ends of cable through cable guides.
3. Attach cable to cable connectors.
4. Attach front cable to connector (if cable was disconnected). Be sure connector is positioned so that pocket is facing downward.
5. Attach adjuster hook and equalizer to intermediate cable and connect retainer hook to frame rail.
6. Adjust parking brake cables.
