Dakota 2WD L4-153 2.5L VIN K FI (1989)
Fig 3 Parking Brake Cables
INSTALLATION
1. Insert front cable through floor pan.
2. Insert cable retainer into hole at bottom of pedal assembly bracket and connect cable end fitting to linkage clevis.
3. Push cable retainer inward until firmly seated against pedal assembly bracket.
4. Install cable boot in floorpan.
5. Raise vehicle.
6. Route cable through frame and seat cable retainer in frame rail.
7. Attach front cable to connector on intermediate cable.
8. Attach guide clip to frame rail on 4-wheel drive models.
9. Adjust parking brakes.
10. Lower vehicle.