Dakota 2WD L4-153 2.5L VIN K FI (1989)
Ignition Lock: Service and Repair
W/Tilt Column
Fig. 2 Ignition lock removal. Models w/tilt column
1.
Disconnect battery ground cable.
2.
Remove turn signal switch as described refer to Vehicle Lighting/Turn Signals/Turn Signal Switch/Service and Repair.
3.
Remove ignition key lamp.
4.
Position ignition lock cylinder in the Lock position, then remove ignition key.
5.
Insert a thin screwdriver into lock cylinder release slot and depress spring latch which releases lock cylinder, then grasp lock cylinder and remove
from column.
6.
Reverse procedure to install.