Dakota 2WD L4-2.5L VIN P (2001)
Speaker: Service and Repair
Speaker - Rear Cab Side - Club Cab Replacement
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the trim panel from the rear cab side inner panel.
Fig.19 Rear Cab Side Panel Speaker Remove/Install - Club Cab
3. Remove the three screws that secure the speaker to the rear cab side inner panel.
4. Pull the speaker away from the mounting hole in the rear cab side inner panel far enough to access the wire harness connector.
5. Disconnect the body wire harness connector from the speaker connector receptacle.
6. Remove the speaker from the rear cab side inner panel.
INSTALLATION
1. Position the speaker to the rear cab side inner panel.
2. Reconnect the body wire harness connector to the speaker connector receptacle.
3. Position the speaker into the mounting hole in the rear cab side inner panel.
4. Install and tighten the three screws that secure the speaker to the rear cab side inner panel. Tighten the screws to 2 Nm (17 in. lbs.).
5. Install the trim panel onto the rear cab side inner panel.
6. Reconnect the battery negative cable.