Dakota 2WD L4-2.5L VIN P (2001)
Fig.6 Clutch Coil Lead Wire Harness
9. Remove the screw and retainer from the clutch coil lead wire harness on the compressor front housing.
Fig.7 Clutch Field Coil Snap Ring Remove
10. Remove the snap ring from the compressor hub and remove the clutch field coil. Slide the clutch field coil off of the compressor hub.
INSTALLATION
1. Install the clutch field coil and snap ring.
2. Install the clutch coil lead wire harness retaining clip on the compressor front housing and tighten the retaining screw.
3. Align the rotor assembly squarely on the front compressor housing hub.
