Dakota 2WD L4-2.5L VIN P (2001)
2. Slide the heater-A/C housing plenum adapter all the way to one side of the plenum opening.
3. Pull downwards sharply and firmly on the opposite side of the plenum adapter to disengage the snap feature from the plenum opening.
4. Remove the plenum adapter from the plenum panel.
5. When reinstalling the heater-A/C housing plenum adapter to the plenum panel opening, be certain that the snap features on each side of the adapter
are fully engaged with the sides of the plenum panel opening. This must be a water tight connection to prevent leaks.
HVAC Housing Plenum Adapter Installation
1. Install the heater-A/C housing, plenum adapter to the plenum panel opening, be certain that the snap features on each side of the adapter are fully
engaged with the sides of the plenum panel opening. This must be a water tight connection to prevent leaks.
2. Install the plenum adapter to the plenum panel.
3. Push upwards sharply and firmly on the opposite side of the plenum adapter to disengage the snap feature to the plenum opening.
4. Slide the heater-A/C housing plenum adapter onto the plenum opening.
5. Install the heater-A/C housing to the vehicle.