Dakota 2WD L4-2.5L VIN P (2001)
Fig. 39 Latch Clip - Type 2
7. Latch Clips: Depending on vehicle model and engine, 2 different types of safety latch clips are used (Fig. 38) or (Fig. 39). Type-1 is tethered to
fuel line and type-2 is not. A special tool will be necessary to disconnect fuel line after latch clip is removed. The latch clip may be used on certain
fuel line/fuel rail connection, or to join fuel lines together.
a. Type 1: Pry up on latch clip with a screw- driver (Fig. 38).
b. Type 2: Separate and unlatch 2 small arms on end of clip (Fig. 39) and swing away from fuel line.
c. Slide latch clip toward fuel rail while lifting with screwdriver.
Fig. 40 Fuel Line Disconnection Using Special Tool
d. Insert special fuel line removal tool (Snap-On number FIH 9055-1 or equivalent) into fuel line (Fig. 40). Use tool to release locking fingers in
end of line.
e. With special tool still inserted, pull fuel line from fuel rail.
f.
After disconnection, locking fingers will remain within quick-connect fitting at end of fuel line.
8. Disconnect quick-connect fitting from fuel system component being serviced.
CONNECTING
1. Inspect quick-connect fitting body and fuel system component for damage. Replace as necessary.
2. Prior to connecting quick-connect fitting to component being serviced, check condition of fitting and component. Clean parts with a lint-free cloth.
