dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

ABOUT US
Crankshaft Position Sensor <--> [Crankshaft Position Sensor] > < Engine Coolant Temperature (ECT) Sensor <--> [Coolant Temperature Sensor/Switch (For Computer)]|Specifications|Page 560

Dakota 2WD L4-2.5L VIN P (2001)

Page 1
background image

Engine Coolant Temperature (ECT) Sensor: Service and Repair

REMOVAL - 2.5L 

WARNING:  HOT, PRESSURIZED COOLANT CAN CAUSE INJURY BY SCALDING. COOLING SYSTEM MUST BE PARTIALLY
DRAINED BEFORE REMOVING THE COOLANT TEMPERATURE SENSOR. 

1. Partially drain cooling system.

2. Disconnect electrical connector from sensor.
3. Remove sensor from thermostat housing.

INSTALLATION - 2.5L 

1. Install sensor.
2. Tighten to 11 Nm (8 ft. lbs.) torque.
3. Replace any lost engine coolant.

Crankshaft Position Sensor <--> [Crankshaft Position Sensor] > < Engine Coolant Temperature (ECT) Sensor <--> [Coolant Temperature Sensor/Switch (For Computer)]|Specifications|Page 560